Jump to content

Swing Arm Bush Replacement


RickGM
This post is 2085 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

  • Moderator

working from memory the shim will allow the swing arm to be totally free from binding when the swing arm pivot is torqued up to spec, you have to remove the damper and wheel and have the bike supported to test that, then just left and release the swing arm and it should move freely

  • Like 1
Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Is this where the shock attaches too at the top of swingarm or the bolt that connects the swingarm to the frame? 

Link to comment
Share on other sites

As Airhead says it's the bottom one. 

12mm dia, approx 200mm long (excluding head), approx 16mm of thread.

The one which connects to the bottom of the shocker on mine is just a clevis pin with a split pin stopping it from coming out (in addition to the tight fit).

Link to comment
Share on other sites

The guy had 3 left when I rebuilt my 175mx. Let me see if I can find him. Brb

Sent from my G8141 using Tapatalk

Link to comment
Share on other sites

Sorry none left from my seller in 2014

Link to comment
Share on other sites

The part number you need is 2N4-22141-00 and is common to over 323 machines. Just a case of looking for one for another model

https://www.cmsnl.com/yamaha-mx175-1980-a-usa_model8746/shaftpivot_2n42214100/

i think you have to log in to see the full list.

https://www.bike-parts-yam.com/yamaha-motorcycle/assignment_spare_parts/2N4-22141-00

this also gives a list of other bikes it fits

 

hope this helps.

Edited by NE0
  • Like 1
Link to comment
Share on other sites

  • Moderator
  • 3 weeks later...
×
×
  • Create New...