Jump to content

Starting problem


pignapper
This post is 1118 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Hi guys. Not been on in a while. Hope all are well.

Im after some help with a strange problem. 97 sr125. When i press the starter button i get strong voltage and good spark then it drops off and no spark. As i take finger off the button voltage grows again and spark returns.

Obviously this all happens quickly but can been seen by eye and on meter.

Im not the best with electrics so any help appriciated.

 

Cheers

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Have you checked the starter relay and motor connections​to see if they're​loose or corroded?

 

Sent from my E6553 using Tapatalk

 

 

Link to comment
Share on other sites

Battery does sound suspect, either has a cell down or a bad connection somewhere is dragging the voltage down

 

Sent from my E6553 using Tapatalk

 

 

Link to comment
Share on other sites

  • 3 years later...
2 hours ago, Joeltozer said:

Any solution to this? 

Probably better starting your own post as this is almost 4yrs old.

If you do fb, sign up to this group, unfortunately it moves a little faster than here nowadays

Link to comment
Share on other sites

3 hours ago, Joeltozer said:

Any solution to this? I’ve got a TW125 with the same issue.

changed the battery, spark plug and starter motor. Got a voltmeter to check where the electrical problem lies but hoped for answers here 

Try a new coil"   , my old cars were like  that,  way back,,,,used to let off the key and they started,,  voltage  not strong  while  starter was engauged ,

 

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...