gt_diff Posted February 27, 2017 Share Posted February 27, 2017 Hi all, just like to say, I don't really use forums, so try to be nice I would also like to find a fabricator, as I am paralysed in my right arm and would like to have a custom made adaptor to fit some motor-bikes, without having to buy and change things on any bike I ride, but I am in the process of changing this one. I have been riding for over 40 years (many scars to prove it) and lost the use of my arm in a motor-bike accident 30 years ago. Still own and ride bikes, the problem is not the UK, but other countries. I would like to find someone that is really up for the task, as I know it won't be straight forward, but more than possible, if you have the right mindset. In East Sussex at the moment, but willing to travel and stay in other areas, if I can find the right person. I am restoring a Yamaha Enduro CT2 175, 1972. Parts are difficult and expensive, especially imports. Presently looking for; Silencer, 214-14753-01-00 Heat shield 314-14718-30-00 Outlet pipe 261-14752-30.00 Petrol Tank gasket cap 308-24612-00-00 There are other parts, but trying other methods, this is not a full restore, but a restore to ride and enjoy. Many thanks, for your time Geoff Link to comment Share on other sites More sharing options...
Ttaskmaster Posted February 27, 2017 Share Posted February 27, 2017 Have you contacted the NABD to see if they can help, at all? http://www.nabd.org.uk/ 1 Link to comment Share on other sites More sharing options...
blackhat250 Posted February 27, 2017 Share Posted February 27, 2017 Hi Geoff, parts are scares for the CT range in Uk, due to very limited numbers sold. DT range is awash with parts, 1 Link to comment Share on other sites More sharing options...
gt_diff Posted February 28, 2017 Author Share Posted February 28, 2017 Thanks, BIackhat, I will get there in the end. 20 hours ago, Ttaskmaster said: Have you contacted the NABD to see if they can help, at all? http://www.nabd.org.uk/ Thanks Ttaskmaster, wasn't ready for that, I thought it was for parts, but I am sure this will help. Ttaskmaster Link to comment Share on other sites More sharing options...
Ttaskmaster Posted February 28, 2017 Share Posted February 28, 2017 From what I recall, they will do what they can to help modify one bike for a rider... but if it's something you can readily transfer to any other bike, it's just as valid. 1 Link to comment Share on other sites More sharing options...
gt_diff Posted March 1, 2017 Author Share Posted March 1, 2017 Thanks again Ttaskmaster, I have been in contact with NABD and they are sending something in the post. Geoff 1 Link to comment Share on other sites More sharing options...
Recommended Posts