Jump to content

Barrel reusable?


mudcow007
This post is 2872 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Just removed the barrel from my original crusty DT engine, shotblasted it in work as it was full of all sorts of crap.

20160516_153956_001_zpsnxaoxnt3.jpg

someones "handy work"  8O

20160516_160738_zpsg97z98w2.jpg

 

Just measure the width of the bore an its 66mm can anyone do the maths an tell me if a rebore is availalble

I did just find this on the Wiseco site

471M06600 $128.00 66.00mm STD
471M06650 $128.00 66.50mm 0.50mm
471M06700 $128.00 67.00mm 1.00mm
471M06750 $148.00 67.50mm 1.50mm
471M06800 $148.00 68.00mm 2.00mm

 

So maybe its on its original piston?

 

thanks

 

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Yeh , I would go up .50 at a time,  .25  sometimes isn't enuuf to true the bore, [ so I "v  heard] :huh:

Link to comment
Share on other sites

Are you going to be able to secure the exhaust?

Link to comment
Share on other sites

  • Moderator

Any good ally welding shop will fill that then drill and tap a new stud. Just make it 8mm (like the IT). They dont snap so readily.

  • Like 1
Link to comment
Share on other sites

Cheers all, the top stud has already been welded (an has a snapped stud for good measure too). 

The plan was to get it filled/ welded then tapped so thanks for confirming

Just need to get on with it now

Also, I will make a request but im looking for any DT175mx parts, when i got the bike it was basically bare an needs most things, so if anyone has anything please let me know

thanks

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...