andyrach1979 Posted September 28, 2014 Share Posted September 28, 2014 Hi, bought my son a dt125. Previous owner tried to convert it to off road but after cutting all wires and removing lights etc he gave up and we bought as it was non runner. It is a 2000 model I think and would appreciate any advice on wiring and cdi to achieve a spark. Thanks Link to comment Share on other sites More sharing options...
dt502001 Posted September 29, 2014 Share Posted September 29, 2014 First you need is a wireing diagram,then main parts are pickup coil to cdi ,cdi to ignition coil and kill switch. Then charging coil to regulator/rectifier to battery and ignition,lighting if you intend to wire it up as well. The owner of the site has made it clear that no copy rights are to be broken so unless someone wants to sit and type out every wire for you,, doubt you going to get all that information. Hayans manuals are cheap and your local Yam dealer can do cd manuals or photo copy pages Link to comment Share on other sites More sharing options...
dt502001 Posted September 29, 2014 Share Posted September 29, 2014 PS you might be able to get the manual from your libary as well. Link to comment Share on other sites More sharing options...
andyrach1979 Posted September 29, 2014 Author Share Posted September 29, 2014 Thanks for reply. He doesnt want to replace lights etc just a field bike so hopefully it will be a little straight forward. Thanks Link to comment Share on other sites More sharing options...
andyrach1979 Posted September 29, 2014 Author Share Posted September 29, 2014 Just ordered manuel. Fingers crossed he will work out the problem and enjoy his first project. Link to comment Share on other sites More sharing options...
James_DT125R Posted October 21, 2014 Share Posted October 21, 2014 if its been attempted to be derestricted they probbly used this method... http://www.scrimsmustangsclassicyamaharestorations.com/derestricting-the-yamaha-dt125r-1988-through-to-2007.html when it comes to checking wires out, try reverse engineering this method see if somthing was changed wrong it changes wires around arse about face ext, i beleive my bike to be done with these instructions aswell Link to comment Share on other sites More sharing options...
Recommended Posts