Jump to content

mono shock


mrmetallica
This post is 3562 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

No it`s not welded,its rusted spray with penetrating lube and keep tring to rotate it, worse case put nut back on a bit And tap with hammer and a block of hard wood.

Link to comment
Share on other sites

No it`s not welded,its rusted spray with penetrating lube and keep tring to rotate it, worse case put nut back on a bit And tap with hammer and a block of hard wood.

ive done all that.there is a type of washer on bolt head side that is bent over on two sides so wont be able to turn the bolt .it just wont move .

Link to comment
Share on other sites

  • Moderator

if the tabs are replaceable, knock them back and turn the bolt to release the rust holding the bolt in

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...