AWA Posted June 26, 2014 Share Posted June 26, 2014 As part of this restoration I decided to have the engine rebuilt. I took the engine to a small shop about a year ago. The mechanic had a multitude of personal problems and could not complete the job. I knew he had started to tear it apart so I went to recover it so I could complete the job. The engine was completely torn apart and the parts were in small unlabeled containers. So now I have all the parts and pieces and know idea of where to start. The transmission seems to be intact. I have purchased all new bearings and seals. Piston and rings. I have the parts manuals and the service manual but they don't thoroughly explain all you would need to know about rebuilding or the problems to avoid. Any suggestions , special tools, or tips anyone could provide would be a great help. Also a good source for the less obvious parts such as shims and spacers would be helpful. I live in the Portland Ore. area. If you know a shop that would be willing to put this together, that would be nice. FYI, the bike is 100% restored other than the engine.Thank You for your help. Link to comment Share on other sites More sharing options...
Calum122 Posted June 26, 2014 Share Posted June 26, 2014 Hello welcome to the site. A little introduction in the welcome section wouldn't go a miss. Two stroke engines are incredibly simple to build. Try and guage it from the photos. And maybe put some photos up here for us to have a little mooch. I do assume it's a two stroke Link to comment Share on other sites More sharing options...
Recommended Posts