Jump to content

caliper seals for xjs900


mrmetallica
This post is 3566 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Not sure what you mean by "middle seals"

Some calipers are made of 2 halves, bolted and dowelled together, mostly they come with advise never to seperate

Unless there is evidence of leakage there, I think Id be inclined to just replace the pistons/seals/fluid, and probably the master cylinder seals too

Link to comment
Share on other sites

Not sure what you mean by "middle seals"

Some calipers are made of 2 halves, bolted and dowelled together, mostly they come with advise never to seperate

Unless there is evidence of leakage there, I think Id be inclined to just replace the pistons/seals/fluid, and probably the master cylinder seals too

the rear caliper had bad white rust on.so ive cleane them up.just need to respray them and new seals and pistons and their done .so i need the middle seals

  • Like 1
Link to comment
Share on other sites

  • Moderator

What year is the bike (one of the benefits of adding a little detail to your profile)?

Have a look here and see if you can see the part - you may need to change the year etc. LINKY

  • Like 1
Link to comment
Share on other sites

What year is the bike (one of the benefits of adding a little detail to your profile)?

Have a look here and see if you can see the part - you may need to change the year etc. LINKY

its a 1997 .thanks for the link that's very useful

Link to comment
Share on other sites

×
×
  • Create New...