Jump to content

Bike only starts with high beam on???


Grouch
This post is 4103 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Recently I upgraded my bulbs and ever since the sidelight has stopped working and now my bike will only start when it is on high beam. What could be causing this?

I knew I should of just left the lights as they were and not interfered, it has caused loads of problems.

Thanks

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

Hey Grouch a couple of ??

1 does the bike turn over on low beam? but not start

2 If you pull in the clutch in netural will the bike turn over on low beam?

3 By side light do you mean the signals and is it just the front or front and rear? And do the signal work?

4 Can you start the bike in gear with the clutch pulled in?

Link to comment
Share on other sites

I'm thinking, with your own self confessed inexperience in working on bikes, is that you have mixed up / disconnected / disturbed some wiring in the headlamp. Get a wiring diagram take the light off and have a look

Link to comment
Share on other sites

×
×
  • Create New...