Jump to content

Part numbers for the Hitachi HSC32 carbs


mtripoli3
This post is 4566 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

Anyone know of a reference for the HSC32 carb. I have a 1981 Maxim XJ650. I'm rebuilding the carbs and ran into a little (I hope) problem. I left the carb block sit in the carb cleaner and all the rubber seals at the end of the throttle rods and in where the return springs are has rotted away. I hadn't planned on taking these apart - so much for that. I have the Yamaha factory manual (paid $82 bucks for it) and would have though it would have been more thorough (it's just slightly better than a Haynes). I'm replacing all the jets, cleaned up a bunch of stuff, replacing all the screws, etc. It's cleaned up pretty good but now I have to replace all the rubber.

Any pointers or help is appreciated!

Thanks,

Mike T.

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.
×
×
  • Create New...