Jump to content

yamaha dt 125 2003


dpreece
This post is 4649 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

can any one help me please i changed the head gasket on my dt 125 the other day and took the power valve off the head when i finished i put it all back together by putting the head on then i put the power valve back on then i started the bike up and it was running fine so i took the bike out for a run and i new there was something wrong with my bike then power valve was not kicking in now the bike will only do about 50mph and it wont rev over 7000 revs. can any one help me pleaseee

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

You probably have it spun the wrong way round.

Check this out http://www.yamahaclub.com/forums/topic/20583-de-restricting-my-dt125r/page__hl__derestricting__st__30

This topic gets dont to death on here lately

Link to comment
Share on other sites

  • Moderator

can any one help me please i changed the head gasket on my dt 125 the other day and took the power valve off the head when i finished i put it all back together by putting the head on then i put the power valve back on then i started the bike up and it was running fine so i took the bike out for a run and i new there was something wrong with my bike then power valve was not kicking in now the bike will only do about 50mph and it wont rev over 7000 revs. can any one help me pleaseee

?????

what exactly does this mean?

the usual way would be to disconnect the cables from the pulley, leaving the PV insitu!

Link to comment
Share on other sites

?????

what exactly does this mean?

the usual way would be to disconnect the cables from the pulley, leaving the PV insitu!

Link to comment
Share on other sites

You probably have it spun the wrong way round.

Check this out http://www.yamahaclub.com/forums/topic/20583-de-restricting-my-dt125r/page__hl__derestricting__st__30

This topic gets dont to death on here lately

thank you very much for your help i done what you said and the bike is running mint now i cant thank you enough thanks again

Link to comment
Share on other sites

You probably have it spun the wrong way round.

Check this out http://www.yamahaclub.com/forums/topic/20583-de-restricting-my-dt125r/page__hl__derestricting__st__30

This topic gets dont to death on here lately

thank you very much for your help i done what you said and the bike is running mint now i cant thank you enough thanks again

Link to comment
Share on other sites

  • Who's Online (See full list)

    • There are no registered users currently online
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...