Jump to content

Foamy's New Toy, XJ650 Turbo :)


wild foamy
This post is 1214 days old and we'd rather you create a new post instead of adding to this one. You can't reply in this post.

Recommended Posts

  • Moderator

So far cheapest quote ive had for the frame only is £230 to be shotblasted and powdercoated, is this a decent price or a ripoff?.

:huh: sounds expensive http://www.triple-s.co.uk/prices.htm they charge £89 for yours (in black), all threads covered, shotblasted and powder coated!

455cc8c0.jpg

Link to comment
Share on other sites

Do you want an ad-free experience? Join today and help support the Yamaha Owners Club.

sounds good, will have to pay the £50 courier charge as west yorkshire is too far from me to drop off in the car, would cost me more than that to get there each way!.

have pinged them an email and hopefully will be able to get a few other parts powdercoated aswell (surge tank for example)

EDIT: just recieved a reply from triple-S and they will charge around £250 to collect, shotblast, powdercoat and deliver the frame, swingarm, handlebars, engine covers, sidestand, mainstand and seat pan, so the rest of the bike will be dismantled shortly after i get back and prepped ready to go

Link to comment
Share on other sites

  • Moderator

Should this picture be in the "Blokes" thread Drewps? Does the frame fancy going for a drink one night ;)

455cc8c0.jpg

Link to comment
Share on other sites

  • Moderator

Think you have lost out there mate, the frame apears to have its spindle firmly burried in the swinger. Oh hang on, er, :blink:

Link to comment
Share on other sites

  • Moderator

Art, Porn or just a machine?

That is a question you could level at every motorcycle, answers on a postcard.

Link to comment
Share on other sites

That is a question you could level at every motorcycle, answers on a postcard.

Asthetically pleasing, complex, engaging, and all components working together in harmony to move the subject. I'd say that qualifies as art...

Link to comment
Share on other sites

Vic: just curious, what sort of money were they after for that turbo?.

ive decided to get another used tank aswell, should hopefully have most if not all of the parts required when i get back to the UK, then its a case of stripping everything down ready for powdercoating, was considering getting the engine cases powdercoated but is it really worth it and will it look right?, also the handlebars were chrome plated at one point but most of it has flaked off, since they are going to be hidden under a cover is it worth getting them re-chromed? im not looking to get the bike to concourse condition but as good and as near to original spec as i can get it for under £2,000

Link to comment
Share on other sites

Powder coat is a polymer and not suitable for engine temps, might be ok on the bars if you completely strip all the chrome off, or you could get them re-chromed with some of that 2k you have burning a hole in your pocket-just means polishing all the time <_<

Link to comment
Share on other sites

Have ya it finished yet Foamy !!! :lol: :lol:

Link to comment
Share on other sites

Foamster, I don't think they even had a price on it - was more a centrepiece for attention!

I remember walking into another dealers many years ago & they had a Honda NR750 sitting on display (I've nearly stopped drooling now)

Link to comment
Share on other sites

Pji Fast Black works fine on the engine, as for casings i painted the outside and polished the centres

Bought a NOS clutch cover centre from an xj750 which fits fine and looks the part

i do recommend soda blasting the block before you paint it, makes for a far nicer finish

The Pump cover just needs the gold inlay doing

19052011446.jpg

Or send your small bits to me and i'll do them in with mine, or can swap your old stuff from my 2nd turbo

Link to comment
Share on other sites

blimey Knight, lets hope i can get my "working parts" to look as good as that!.

i think i will stick with the original clutch cover for now to keep it as original as i can, as for the cases after seeing how good your have turned out im going to paint them instead, the handlebars will be powdercoated though, isnt really much point in rechroming them as they are going to be hidden under a plastic cover anyway, or i could get some "chrome in a can" from halfrauds lol

and no 2-wheels, i havent finished it yet lol, im still out of the country, but im now stockpiling parts ready for when im back :)

Link to comment
Share on other sites

  • 4 weeks later...

well peeps its been a while, less than two weeks now and i will be tearing into that turbo getting it ready for powdercoating/painting/rechroming, havent yet managed to find a decent new-old-stock 100/90-19 front tyre (got myself an avon roadrider for £15 for the XJ600 though, sweet!)

all the bits are waiting at home, everything from the brake pads, caliper seal kits, the new seat i got from america, even a load of PJ1 cans!, its going to be like christmas day when i get back! :D

Link to comment
Share on other sites

×
×
  • Create New...