R6Jools
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Yamaha Racing News.
Media Demo
Store
Collections
Classifieds
Posts posted by R6Jools
-
-
Hi everyone,
I've just got a 2008 R1 and I saw one last summer with the standard cans modified, it looked and sounded good! Anyone know how it's done?
Failing that anyone selling a nice cheap pair of race cans?
Thanks
Hux
Yes you can................
If you look on fleabay you'll find the endcap kit, my mate paid about £40-60 for them.
You do have to cut the end off your stock cans then repack and rivet the new caps onto your now shorter cans.
Ends up stupidly loud tho!
-
-
Seems to be a Michelin trait.
I used to run the 2CT's and Pilot Sport Cups on my old Monster 900, and found that both would spin up quite easy when worn. Though they did slide with a really progressive feel though, and i quite enjoyed going through corners sideways like McCoy!!
-
My top five in no order:
1- TZR125 - First road bike.
2- OWO1 - Still makes me dribble like a spotty teen with bumfluff.
3 - R7 - Needs no explanation.................
4 - TZR250 Reverse cylinder - For the simple reason of fond memories of the early 90's
5 - 08/09 R6 - Sheer beauty!!!!
-
Yeh thought so! I'm getting the tail of the blue R6, so I'm trying to see if i can modify the white yam cowel with a red trim or even find somewhere that sells them... or last resort use a non-backrest one...
Hehehe.
Did that to my 08 reg.
Pads not available as a separate part, i called Yamaha UK
The only way to fit a red pad to the white cover is to buy a black/red and a white/black cover and swap the pads, then put the black cover with black pad on eBay!!!!
Does anyone do a non backrest seat cover for the 08 model???
-
WOW they look good!! Alot better than mine! Did you say you have put foam above them?
All I've done is use the supplied sticky pads, then cut a 2" wide slice from an old car wash sponge (
) to fill the space above and stop them vibrating loose.If you've used velcro it'll be too thick, is it?
-
Nice one! I'll be ordering a pair of those when i get home! Where did you acquire your seat cowel may i ask?
local Yamaha Dealer........Infinity at Clapham.
Its just the Genuine Yam part, £120.
-
Here's a pic of the plates fitted to an '08 model!!
-
Ive used velcro on mine now!!! Let us know how you get on with yours R6Jools and if you have the same problems with the sticky pads.
Just got back from ride and still in place thanks.
Tho having seen you're post i cut two cubes of foam to pack the space above!
Bit dark now, so gonna take a few pics to post tomorrow.
-
I think this is the link, they look like push fit, let us know whether they are the same ones and how you get on with them
http://cgi.ebay.co.uk/Yamaha-R6-passenger-...A1%7C240%3A1318
Woohoo!!
Cheers for the heads up on these Goldy.
They arrived yesterday, so will be sticking 'em on tomorrow.
Will have to post a few pics of the MkII once they're on.
-
You need to check if your bike has the YISS immobilizer installed.
If so, a cut key will not work, as there is no transponder chip fitted in it, you need to contact Yamaha with the key number, (on the little metal tag if you have it) for replacements.
The red key is to reprogram the YISS, usually only needed after disconnecting the ECU or battery.
If the Yamaha system is anything like the Ducati one, if you loose the red key you will need a new ECU, and a second mortgage to pay for it!
-
Its actually a fairly big job to fit any tail tidy to an '08 R6, allow at least an hour, 2 cups of tea, 4 fags and a skinned knuckle or two!!
First remove both seats,
then the top shell of the tail, 6 plastic rivets and 1 allen bolt.
(To remove the rivet type clips, push in the center till it clicks then just lift out the whole clip. (to refit, push the center back up two clicks so it sticks out the top, refit and push the center flush to lock))
remove the cowling around the rider seat, 4 plastic 1/4 turn screw type clips, 2 plastic rivets underneath at front and 4 screws underneath.
remove alloy plate, 4 screws.
remove pillion seat lock bar, 2 allen bolts and R clip (pay attention to how the spring is seated and make sure not to loose the white nylon shim under the bracket)
unclip the ECU from the tray, then release the 1 large black clip underneath (use a flat screwdriver to slide under center of clip, there are 2 cut outs for this, and pry up center to release then lift out) this finally releases the black tray (enough) to access the 4 bolts holding on the number plate bracket!!!
then you've just gotta refit it all in reverse.
Have fun!!
ps. I'm in sw london, if you fancy a ride out sometime PM me!
-
Some thieving scumbags stole my pride and joy last night 21/22-08-08.
'08 R6
Red/White
Quite distinctive as i fitted Genuine Yamaha parts white tail plastics in place of matt black and pillion cover in white with black pad.
Also R&G Titanium colour tail tidy, R&G swingarm spools, Acrapovic megaphone, Yamaha tinted double bubble screen.
I know its a long shot but if anyone sees it or has any info, let me know!!
-
Would you say it's worth fitting a steering damper to the new R6? This bike won't see a track day. Heard it's prone to shaking a bit.
thanks
In a word........No.
I've had no head shakes at all so far. Already done over 1200 miles, and usually like its stolen.
Spend the money on something like a nice loud pipe!!
-
Just thought i'd update you peeps on how things are going................
Tank warning sticker off - resorted to Evo-stik adhesive remover, as had no joy with WD40 and hair dryer. Worked perfectly!!
Fitted an Akrapovic titanium megaphone and white single seat cover a couple of weeks ago.
Just (10 mins ago) fitted the white tail plastics from the blue model, as i didn't really like the matt black tail.
Very tempted to now go for an Abarth sticker kit.............
-
Still looking around best i found was £3590 fully comp on a 2000 model still too much i think. Fully comp seems to be cheaper than TPFT . Tried some other bikes aswell GSXR600 2000 £1600 TPFT and 600 Hornet £1200 TPFT and the cheapest was SV650 2004 £999 TPFT. Any advice?
I've recently bought an 08 R6 and live in SW London, having previously paid £200 a year for my Monster 900, it went up to £700 (Comp) for the R6. I found MCE and Bennetts to be way cheaper than anyone else. The policy from both is actually from Groupama.
Went with MCE as they were actually more helpful, and gave better customer service.
The bad news is, I'm 34 and held my A class for over 12 years...............
-
Cool, thanks Goff, i'll try that tomorrow.
Tho best not let the missus catch me with her hair dryer!!
-
Picked up my beautiful white 08 R6 last friday, having ridden a heavily modded Ducati M900 for the last few years, i'm in love!!! Like riding a 250 2-stroke again, tho i'm having difficulty keeping to the 8300rpm running in rule. Especially having tasted the 8750ish boost from the YCCi. Its as addictive as crack (So i'm told!!)
I've already done the R&G tail tidy and flush indicator jobs, and plenty more mods to come.
But just have a couple of questions i hope someone can help with!
a- Where can i get a pair of pillion peg blank plates from?
b- Any tips on removing the cra99y big warning sticker on the tank? (So i can fit a tank pad) The clear film came off, leaving the white layer with the writing, which only comes off in microscopic bits!!
) to fill the space above and stop them vibrating loose.
08 R6 Questions
in Naked
Posted
The blank plates are usually listed on eBay, but just done a quick search and can't see any.