Jump to content

gateway

Supporter
  • Posts

    4
  • Joined

  • Last visited

About gateway

  • Birthday 05/05/1960

Previous Fields

  • Current Bike(s)
    yamaha 400 specail kawasaki 1000 cc honda 900

Profile Information

  • Gender
    Male
  • Location
    torquay

gateway's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. hi the plates are ok and there is a mushroom head at the end of the rod that pushes againts the metel plate were the springs bolt on to that puches againts the clutch plates
  2. hi the clutch cable is at the right lengh i have put a screwdriver in were the little piston that comes out when i pull on the clutch and it comes out about a inch but when i put it all bact together it does not do anything i am wondering if it could be the springs as when i first took it apart the plate was not in the groves and the person who put the new clutch plates in did not see what he done and compressed the springs to much i have ordered new springs
  3. hi the ballberaring is in the end of the clutch leaver on the right handside of the engine and it pushes the rod through to the clutch plates as i have put a screwdriver in there and when i pull the clutch cable handle in it puches the screwdriver out about a inch
  4. i am redoing a yamaha xs400 1980 the problum i have is the clutch does not in gage when the the cluch handley is pulled in to change gear i have renewed the clutch plates and still does it does any one have any ideas what else it could be thanks les
×
×
  • Create New...