Jump to content

Simon46

Free
  • Posts

    285
  • Joined

  • Last visited

  • Days Won

    12

Posts posted by Simon46

  1. Well after many hours and also building a dva adapter for multimeter to test cdi reconnected cdi in unpotted format to test and she sparks. connected fuel  and on 4th crank she ran. that twin pot two stroke is loud with the exhaust prop out of the water! love it when you fire an engine for the first time.

    Had to pull plug caps off to stop her though. 

    • Like 5
  2. On 24/09/2016 at 5:54 PM, drewpy said:

    Just got back from Hull, bloody windy on the motorway and it was down to 40 mph on the higher levels

     

    Did you pass a 1996 red bandit 1200n onthe m62 in the slow lane on your way back? My vw caddy 1.6 broke injector 1 and I was riding back from Dewsbury to cheadle sat afternoon after picking up a good one from breakers. Frighteningly high wind so much so I wanted to pull over and stop! 

  3. Its a big engine 2 cyl 2 stroke 800 cc. Cdi had crack through the potting as if something has gone pop and its been left outside for 2 years. Needs replacing anyway. All discrete components internally not a chip in sight. Just scr's caps diodes and resistors.

  4. 0 at the moment. No spark. Too many safety devices on the throttle. In gear no start cutout and wrist lanyard if you fall out the boat it unplugs and kills ignition. I will be starting by bypassing these to see if motor will run and go from there. 

    Cant be as expensive as a DT175mx field bike resto!

    S.

    • Like 2
×
×
  • Create New...