ridercooke

Ahh right well im thinking now just put it in and try it all they can say is fail but I think at they might just say to change them. They flash thats the main thing haha

I will see today if I can get the bulbs out because it looks like they a glued shut. If I cant I will take them off so they cant be tested then sort them out after its on the road.

Ahh right they are these ones on ebay 400536937669 only fitted 2 to the back .

Yeah all the the lights ect work it was only the indicators that needed to be changed. Where is the relay on a dt ?

Fitted 2 new indicators and for some reason (it did it before) they flash fast. I was thinking its because the bike was not started nor have I tried them with the bike started. (other things need doing first) but I cant see that making much difference tbh. They all flash no bulbs out ect so first question 1. What could be the reason for them flashing fast ? 2. Will it pass a mot with fast indicators? Cheers joe

Yeah got new pads so will strip it and lube it. I dont want to buy another in a years time haha

Managed to find a caliper and bracket. £70 o well it needed it so had to have it really cheers for the help hope this ones alright.

Yeah better check them tomoz then and yeah going to keep my eye open gutted nearly ready for mot aswell

Yeah well here's the list of what has been done/being done New rear brake haha after that I'm going to strip the front and lube that up. New rev counter cable New chain and sprockets and lube the back spindle New seat cover (don't want a wet bum) New front wheel bearings New speedo drive Touch up the paint abit on the frame New rear pads The throttle suck sometimes so gave that a lube up so that's working now Cluch was hard to pull so had the cable off and got that smooth again New indicators and rear light as that was all not working Few other little bits and bobs I don't think it's been looked after for a while. But I will do my best with it Trying to find a caliper and mounting bracket is hard there's not many about !!!!!!!!

Ok cheers for the help. Best get looking for a new one

I will have ago at drilling a hole in it tomorrow and give that ago put loads of penetrating oil in it for 2 days now haha O yeah the pistons seized haha thats rock solid aswell. Ohh the joys

I have had to admit defeat. Tried heating it up but nothing needs a new one and the bit it bolts/slide onto to hold it on the spindle. Anyone got one or know where I can get one from ?

10 forgot my first bike a iteljet 50 not sure how to spell it haha I didn't relise it was so many till I typed them in haha Think I can remember it I was at Westfield crescent many years ago.

Yeah its out and the brake on the side just cant free it up. Is it one bolt and a slider ? It looks to me to be a slider but its on there hard so seems there's a bolt somewhere.

Has anyone got a picture of a rear brake in bites ? I can get the bit that holds the pads in to move up and down about 3mm but for some reason it wont slide off so I can get the the dragging piston. I have taken the bolt from the one slider but theres not a bolt the other side. Just wanted to check before the hammer comes out cheers

Yeah fingers crossed will be a week or so depending on parts turning up Gotta find a new speedo drive as the one I ordered is the wrong one I see your from yeovil. What part because thats where I mived from

Just signed up as I have just got myself a dt125r for a run around as going for my full bike licence also to keep the miles and fuel bill down on my car Im not new to bikes had a number of bikes in my life im 20 now also my dad has had bikes all my life and his. List of my bikes: Yamaha ty80 Suzuki rm125 Honda cr125 Honda cr250 Piaggio nrg50 Speedfight 100 Gilera stalker 50 Stomp yz 140 pitbike Current 52 plate dt125r It needs abit of work currently stripped down and waiting for a far few parts to turn up then off for mot and tax then I will be on the road really cant wait to take her for a spin on and off the road. Nice to meet you all