Jump to content

Trex9

Free
  • Posts

    2
  • Joined

  • Last visited

Previous Fields

  • Current Bike(s)
    01 yamaha yzf 600r thundercat

Trex9's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. ok now ive tried splicince the old lights with the new lights and still no go ive scoured and scoured all over the internet but cant find a reliable way to wire these up. I put diodes on them and i know the get juice but when i turn on the turn signal there is a low flash from the fronts and the backs are barely lit. Please help there has to be some easy solution to this. oh and if i wire up the indicator wire the just stay on and no blink at all.
  2. Hi this is my first post so bare with me. I have an 01 thundercat that has been layed down on both sides. So instead of getting the stock turnsignals replaced i bought aftermarket leds. I have previously put new led lights on the back and have had no problem but when i went to swap the fronts out I found 3 wires: blue/red , Black, and Brown . I know what all the wires are for, but when I hook my 2 wired led lights up yellow into brown and black into black nothing seems to work. ive also tried having one stock signal on and one led. Thats when i get mixed results. I can turn the right blinker on and everything is fine but when i turn the left one on all the lights come on.when i have both leds on and I go to turn the signaler on no lights turn on in the front but both lights in the back a dimly lit. It seems like the blue/red ones need to have a place to go for everything to work, but how? whew....
×
×
  • Create New...