Connor dt
-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Yamaha Racing News.
Media Demo
Store
Collections
Classifieds
Posts posted by Connor dt
-
-
you have mis-understood what I asked you.
when the pv pulley slot is aligned with the hole , did you feel or look into the port, it should be smooth at the top,
oww it Rectangular with two curved edges
-
Connor is your PV set up right, do you know if the part where the pulley bolts onto is
1: Diamond shaped?
or
2: Rectangular with two curved edges?
did you check it is fully open by feeling in the exhaust port when you had the exhaust off?
It is like this guys :-
http://www.youtube.com/watch?v=-4Xhmw5zIi4
And i have not checked the exhust, is its not open fully on the exhust do you just puch it open?
Cherss matee
-
Hello everyone.
I have a 2001 dtr 5000miles,
i have brought a new exhust, taken out the reed switch and unpluged the PV and put it fully open.
But it still wont go past about 65mph and there is no drive in th gear if anything it gets slower in 6th?
Dose anyone know if there is a different restriction on it or any other way to improve the bike performance?
Any Adive greatly appreceated
-
Yoo
Does anyone know the best chain/sprocket for a dt125 2001 for acceleration?
If so were could i get it from ?
Thanks Everyone!!
-
If you have disconnected the PV from the wiring loom it wont move when you put the key in as there will be no electric going to the servo to power it.
Thank you Vezz
-
Position the PV so its fully open and unplug the pv servo from the wiring loom.
How do you position it because when i try to pull it over the hole when i put the key in it just moves back?
Thanks for the help
-
Hello again
I have a 2001 dt125r and was wondering if you can upgrade the power valve? or tune it?
i know on older models you could keep it open for more rev.. but on the newer models the valve is electric so is there any way of gettin it to stay open?
Thanks everyoneeeee
-
yo,
I have unrestricted my dtr125 2001 and put a big one system on it, i was just wondering how i could improve the performance more any suggestions?
Thanks everyone!
-
-
me too, bet it cost a fair few bob tho
Yeah i know but would be fun to do
-
i belive this is the ultimate conversion
i just love the look of it when finished
http://www.youtube.com/watch?v=NnuTyafA1pw
I would love to do that to mine
-
Do you know the best place to get a 240 jet?
Thanks vez always helpful
-
Hello!
Im gettin a big one full system for my 2001 dtr 125, but i wont to also re-jet the carb
Can anyone show me how to re-jet pleaseee
Thanks as always
-
No, reed left out will be fine.
If ya get a Full system Big One, then you will have to rejet your carb.
Is it difficult to rejet? Also How
-
The reed switch will let the reves rev full, But with the exhaust not done the engine cant get rid of the gasses fast enough so this retards the engine, Therefor ya have to do the 2 things. Take your exhaust off and have a look ta see what kind of restriction it has. You have a 2001 bike so probably in the neck of it where it bolts to the exhaust port.
Be carefull cutting it out,,,,,,,,,,,it seemes from another post someone has made a balls of there pipe.
I was goin to get a Big One Exhust soon so i was just goin to leave it for know, do you think i should re attach the reed to stop damage?
thanks
-
Let me get this right, You have taken out the reed and it still runs?
Edit, Not thinking right, thought for a minute you meant the reed valves
AHAH no just un restricted it
-
Ya can get a digital spedo for a mountain-bike for cheep and it works ok ish if ya set it up right. I put one on my DT just to have a clock for my trip to Squires. Unfortunatly when i went over 70mph i think i blew it up, i guess not meant for that speed,,,,,,,but the good news the clock still works.
I think im goin to get a proper 1
Also mate my bike struggles to get over 60-65mph iv taken out the reed, but not the exhusts restriction i was wondering if there is anything else to do
-
thanks you both very helpful i wont bother
-
HELLO
I was thinking about gettin a digital speedo for my 2001 dtr but was wondering if there is any way of gettin a fule gadge fitted in it ?
Thanks as always Connor
-
-
I'm confused, your profile says DTR...not DTX
it is a dtr, i just wont some supermoto tyers for it.
-
Everyone
Im looking to bye more supermoto tyers for my 2001 dtr
Dose anyone know were i can fined some
Thankss
-
-
Hello Again,
I have a 2001 dtr and wont to convert it to a supermoto i have a picture of the bike on my profile. (not sure how to add a pic to posts )
If anyone can help i would be greatful thank you all!
slow dt??
in Dual Sport, Offroad Bikes
Posted
I will ahve a look tomorrow and get back to you mate
Thankss