Leaderboard

78 Yamaha XS500 C OEM Chain Guard 1A8-22310-00-00 MY124 | eBay E-Bay and Google are your friends... P.S. You wrote: 1A8-22310-00-00 It should have been: 1A8-22310-00

I finally found a downloadable service manual that covers the 1995 with the KYB USD fork and figured out how to free the spring from the damper rod. Of course it requires a special tool that can easily be improvised with some plastic pipe and a washer but since the seals can easily be replaced without disturbing the spring, I decided to simply wash everything with Maxxis Suspension cleaner and call it good. Rather than using air space to measure oil, I used volume. I put in slightly more than 16 US ounces in an effort to stiffen the compression a bit. I also used 15W oil. I won't bore you with all the work, time and money I put into this project but it was a fight at every turn. Now the bike that had been "stored" for 29 years with 162 miles on the odometer, now has 168 miles on it. Tomorrow, much more! https://www.facebook.com/bicycle.repairman.75/

Hey again, just following up as mentioned, bike is now back together and the first run has been had with no issues , ended up having to go with a straight through muffler so it could breathe (and sounds great). Looking forward to many more miles, I must say the power increase is amazing and would highly recommend doing if you have the bike and the time. Some pics....cheers Baz.

Snakebite - yes, have it already insured. Only found this forum once it was already done. Looking forward to ride and enjoy it as much as I can. One thing that really stuck to me was when my instructor said - always ride to your own expertise. Never been on bike before CBT, didn't get CBT done first try either, first experience was pretty groundbreaking for me as I managed to ride ok for most part and then at some point I had brain fart, panicked and ditched it dropping it on me just to finish my gracious manoeuvre off. Hard lesson was learned on first attempt on a bike, second time went a lot better, but boy oh boy I have lots to learn. I hope I will have lots of experiences, lessons and emotions to share with you guys and generations to come.

Two wives decided on a girlie night out. On the way home they needed a pee and nipped into a graveyard. Then they realised that they didn't have any wipes to finish up, so the first one used her knickers, and the second one found a wreath and used that. The next day one husband rang the other and said 'No more girlie nights out, mine came home with no knickers on'. The other said, 'Well if you think that's bad mine came home with a card in her crack that said 'From all of us at the fire station - we'll never forget you.''

Looks good!

How about JASO MA2 specification for oil which is intended for clutches that run in oil … I get to answer myself when I found the answers here https://yambits.co.uk/oils_parts_for_yamaha_xs500.html

another warm welcome from me.

Have you tried You tube? Lots of XS500 videos, too many for me to view, but I notice this blue one has the same size font on the side panels as your photo of the black one. it maybe a case of going through them as some may have the correct tank but not side panel and visa versa.

get these from image works http://www.bike-stickers.com/homepage.htm

https://www.motorcycleclassics.com/classic-japanese-motorcycles/classic-yamaha-motorcycles/1978-yamaha-xs500e-zmmz14ndzkel/ close

My first Yamaha was a 1980 XS850 Midnight Special the previous owner had installed lower bars and a bullet fairing. I wish I still had that one. The current project is a 1995 FZR1000 EXUP with 162 miles on it. It was "stored" (neglected) for 28 years. During the year it sat (neglected) in my garage, mice had filled it with dog food and damaged some of the wires. Long story short, the last thing before it's like a new bike is fork seals but I don't have 1995 manual/supplement to tell me the factory air space/oil lever for the KYB USD forks. I assume compressed with springs out. Anyone? Thanks, Danny

Welcome to the forum

Hello everyone, I have been interested in motorcycles and have been riding since I was 12 years old. Not very exciting motorcycles at the start but the highlight came already in 1975 when I bought a 1974 Yamaha LS2. The following year I got my license for light motorcycle and bought my second LS2 and in 1977 it became the RS100 which was a step down from the LS2. There has only been one more Yamaha, XT500 which I bought used in 1987. There have been many motorcycles over the years. Today I have four motorcycles and just bought a XS500D that needs a lot of repairs. Lives with my wife in Lillestrøm Norway and has worked with cars all my life. I'm not very good at English, but today there is help to get

Hi there, big welcome from me, I don't think your English is that bad, you've made a good introduction. well done.

try these guys, check out the tank and side covers https://www.cmsnl.com/yamaha-xs500-1977-1h3-europe-1h228-198e5_model37276/partslist/0038.html

I can't help you with the diagnostics, but, if you've bought it to 'restore' it. Then you might as well change the exhaust for the right one, you're going to have to do it at some point... ALWAYS provide photos/videos!

I believe 1995 was the last year. Thank you, Neo! That's exactly what I needed. I'm not sure what "Preload Adjuster 0 mm Range" means though. My forks have adjustable preload.

Hello everyone, Just joined the club to see what goes on with a view to become a full member and thought I would introduce myself. Got my first bike at 17 in 1968, Yamaha C90 and over the years had many yamaha's including 2 fjr1300's, a Diversion 600 and 3 Tracers with the 9GT being the bike I'm now on two and a half years old with almost 18000 miles on it.I also have a Triumph bonneville t100(sorry if that's swearing on this forum) I joined the IAM when I reached 68 years old to see if I was still capable to ride and still riding at 72 so must be doing something right.

Hi and thanks for the warm welcome. I have a 2018 in blue and love riding round the Peak district in the summer on it. Photo worked so here's my Tracer.

solved

after being blocked out for years I am back good new or bad ? thanks for sorting it Alex

Well folks another year rapidly draws to a close! Here's wishing you ALL a Merry Christmas and prosperous New Year. A special thank you to Alex for keeping the website up and running and to all the mods who keep the site in order. The site wouldn't be what it is though without YOU the members, old and new, paid members and free. (of which after 10 years I have decided to become a paid member!) So to all you visitors, don't be shy and post the occasional reply or start a new topic, because without you we would have nothing to read! All the best for next year NE0

Happy new year all! Just back from a 7k km road trip with two screaming kids, never thought I'd be glad to be home

Deleted Duplicate Post...

I've done a 1986 dt125lc mk2 and fitted a big one full system (fresco) and it works and sounds perfect

1/ Not a clue, they don't appear to make one... 2/ As far as I can tell, if it's oily, it's ok, if it's not, it's bad... 3/ Yes, the pump WILL stop if you have the nozzle fully in the tank, however, since you're filling to almost the top of the tank you won't actually have the nozzle in the tank... So, no... 4/ Pro: Sounds good. Con: Could get you arrested...

Well RaySin, lets see.... Haynes or Clymer are the publishers of workshop manuals , unfortunately It doesn't look like they cover your bike......yet! That's not to say they won't in the future. So pdfs and USB versions of yamaha service manuals are probably all thats available at the moment. Ebay is worth keeping an eye on availability of anything, even if you don't want it!. As regards to Chains, they need to be kept oily, a dry chain will squeak and if it's squeaking you're creating wear! too much oil and it sprays all over the wheels and chrome, and too little it will squeak away. Get into a habit of putting it on, chain spray is probably your best bet, it's easy to do. Unfortunately an oily chain also attracts road dirt and sticks to it, causing grinding, you can't win.!!! Chains don't last forever, so it really is down to regular maintenance. It's worth noting that apart from a dry chain or oily chain, there is another condition that chains can get and that's clicking chains from stiff links, it might be only one link but it gives a unique sound. It also means you've not been doing your maintenance! Chains will often play up after wet weather! The other aspects of chains is that over time they stretch! so you need to move the wheel back a tad and still keep the wheel aligned!! Too slack a chain and it will clatter on the chain guard, or jump a cog!! Too tight and your gearbox and sprockets get put under too much tension leading to more wear!! it's ALL a delicate balancing act!! You'll love it!! As regards to filling her up, don't rely on the auto shut off from the nozzle. Bike tanks are not big so it doesn't take much to fill them up. The best advice regardless, is keep the fuel off the petrol tank otherwise your paintwork will suffer. Careful trigger control is the key and keeping an eye on just inside the tank would be my advice. And as you're a newbie, don't hesitate to pull off some of that blue roll all petrol stations have between pumps, and keep it handy to wipe off any spills or drips quickly. And finally, loud pipes... only you will love them. Everybody else older than you will think you're a nob. .....but we've all been nobs at least once! Enjoy...

That's great, thanks...the wemoto ones look the ticket!

Hi all, new here. I'm looking at buying a Virago DragStar XVS125 from 2002. The photos look good but before I go and see it in person I was wondering if there was anything in particular to look out for on these bikes? Thank you all! TdashJ

Well, I am super hyped up 33 year old who just got his CBT done a week ago. My ride - Yamaha drag star 125. Absolutely love it!

You're seriously hoping that TWINSHOCK is going to reply? He last visited the site in 2010 and his post about the luggage rack was in 2009. Good luck with that one bud!

I have 2 Yamaha motor cycles and have a question regarding 9 digit VIN numbers on my bikes. Can anyone help decode them, please. 1KT xxxxxx 1WGO xxxxx Any help would be appreciated as the DVLA seem to have made a mess of the V5s - one is down as being manufactured in Thailand! Many thanks Michael

Thanks, fixed, there was an error in the CSS. I'm pretty sure there's a way to flip the theme to dark, or used to be. I'll take a look later.

Done and dusted now. However we will need to redeploy everything from scratch on a new server, this backup I can't find any evidence of the Malware but I don't know how long it may have been dormant for or if it was loaded to RAM, or any backdoors enabled. I have no idea how the server was exploited, the only vunerabilty I could find was that one of my dev sites had an old version of PHP. I think that was the most likely culprit.

Hi finally after a year of fault finding and replacing the wiring loom after finding a mouse had made a mess of it and replacing other parts. I havejust got the engine turned over under its own power. Now to get it ready of it's MOT

Well, don't forget to come back and let us know how it goes...

Hi just got my membership number so happy days. I emailed YOC and they replied with my membership number, which has saved me £70 on my Yamaha it250f insurance

No progress on CDI unit, have had a couple of used ones through EBay which haven’t generated a spark at all. On the plus side Theory Test Passed and Module 1 booked for late June

Not a clue on reliability, never heard of them before. But E-Bay is your friend most of the time for parts. Past that there's always Yambits : Yambits - Yamaha Parts

Welcome in, I had to google what a Radian was, but looks cool. If you become a full member here, you can get a discount on your insurance from Bikesure...

Looks solid! Nice bike...

Nope just Nope, I want to ride the bike not some bloody computer, if I fall off then I learn to get better this fools you into thinking your brilliant right up till your not. Much better to invent a centre stand that does'nt need you to be a weight lifter.

No problem Drewpy, I might come up your direction the following month.

You can check out any time you like but you can never leave

Yamaha came through! They just e-mailed me the Service Manual. I am now the happy owner of mystical torque specs

I hope this comes out as it so fooking funny. The Yorkshire accent makes this all the better w4POSqOqO2.mp4

Final report ..... The fuse was blowing because the ignition switch was the wrong one!! It looked at first sight to be the same but it was wired internally differently. There is no way it could ever work although it fitted perfectly. Andy's Motorcycles ad was rather misleading in that it implied (as do many of them) that the switch would suit all YBR125's with a four wire ignition switch, three wires in a block and one loose "bullet type" connector. This is not true. My bike is a 2008 YBR125 Custom Looking at the wiring diagram it clearly shows that there are four connections inside the switch and in the "off" position NONE of the wires make contact, they are all isolated. In the "on" position each of two pairs make contact. For example: "Off" position - no wires make contact - all open circuit. Red (loose wire, bullet connector) main 12v feed from battery. Brown (block connector) Black (block connector) Black/white (block connector) "On" position Red wire connected to Brown wire Black wire connected to Black/white wire The switch that was supplied made one pair contact in the "on" position while the other pair was open circuit, and in the "off" position the roles were reversed. It could never be wired to suit my bike. Physically the switches looked the same (apart from wire colour) and you need a meter to test exactly which wires are switched in which position. It is not easy to source the proper switch, even main Yamaha dealers are confused. Luckily, because the two switches clearly come from the same manufacturer and it is only the contact plates that are different, I was able to carefully prise open the electrical contact plates and swap the correct contacts from the old switch into the housing of the new switch - brilliant. Be warned.

its a bad idea m8 ! save ur money and buy a 250cc engine to put in the beast! the crank is a week point in the engine even as a 125! so boring it up to any amount is goin to put more strain on it. the problem is the bottom end of the crank where the conrods connect...its just metal on metal so is slowly grinding down which eventually causes too big a gap between the conrod and crank, this lets the conrod move side to side and knackers up the engine! with it being a 125 its not bad and will last you a fair few years (as long as the oil is good) but with the added "boom" of a re-bore it will wear down a HELL of allot faster! but by all means do it if you want but il be taking bets on how long it will last! and my bet will be 2 weeks ....if your lucky! iv put a honda cbr 125 (2004) in mine, cost about £900 all in all but iv done all the work myself including making custom mounts, air filter, and wiring. its a big job and not one to be taken lightly but i can add a 150cc bore kit to it for about £200 which wont damage the engine. (cause the engine is originally designed to be a 150cc but for the uk market they put a 125cc barrel, piston, and head on it) at the end of the day it will be cheaper (and more practical) to put a new bigger engine in there...rather than spend money on a mod that will not last 2 weeks. try this link My link they have decent engines for sale and the parts are cheep enough that you dont mind if something goes pop. it was my 1st choice for an engine but since i only have a provisional license i wouldnt get value for money (in terms of bhp) im sure if you give them a ring you might be able to get them to fit it all for you! (for a cost of course) but its probably ur best bet.