Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 12/03/2022 in all areas

  1. Hi Neo, thanks very much for your research, it's much appreciated. I scraped the soot from the neck of one of the exhausts but it hardly made any difference to the diameter measurements, and I couldn't really feel much of a step inside the neck either so I'm not sure that a ring type gasket fits inside. I've used exhaust paste in the past to seal exhaust joints, but as you say it can be a real pain to seperate them again. A friend has suggested smearing Blue Hylomar on the downpipes before pushing the downpipes into the silencers. it doesn't harden and it copes with high temperatures. If it doesn't do the job at least it won't be a problem seperating the pipes again to clean it off. I hadn't thought about looking for a microfiche for the RS200 as I don't have access to a reader, but after you mentioned being able to read them using a loupe and a strong light I thought I'd have a look. I've now found and bought a microfiche for the RS200 from Germany. it's for a 1980 model, but has the 3L2 suffix so hopefully there won't have been too many model changes during the production run, besides it was only 11 quid so it hasn't broken the bank. As you've mentioned, once I have a part number I can start doing comparisons with other models. Thanks a million for all your help. You've pointed me in other directions that I hadn't thought about, hopefully one of them will lead me to a successful conclusion! All the best, Stuart
    1 point
×
×
  • Create New...