Leaderboard

Here's my XJ6 s 2012 I bought recently. Only 1,750 miles on the clock! It's a great ride, excellent condition really comfortable and pretty quick. I think I'll be keeping this one for a while...

Happy easter everybody

Hello, I've been a yammy man for a long time, since my first 350YPVS back in the very early nineties, I've built countless specials over the years and more recently I've been working through my bucket list, buying tired but low mileage cosmetically challenged bikes and restoring them back to mint original perfection, doing everything myself in my domestic garage, fabrication, plating, painting everything. I've always loved the unloved underdog, nothing better than stuffing an underpowered bike past a wobbly sunday barstool racer on his 'superbike' So I'd been half looking for a SZR660, they've always interested me, a nice single in a small light good handling chassis, the potential is there, just that Belgarda made a dogs breakfast of packaging it. Then a bike popped up on ebay, yeah the fairing was fitted all wrong and looked awkward but it already had a few desirable bits for the special I already had visualised and more importantly was much cheaper than the overpriced original bikes that dreamers on ebay seem to think are desirable. As soon as it arrived it was stripped and the project started.... First up get that fairing off and suddenly it looked much lighter The look I'm going for is naked, stripped down, lightweight - taking styling cues from the SDR200 and R-1Z, now the seat unit looked way too big as well so that came off as well, and then the engine came out and it was much lighter Few hours later and I was down to the starting point of a bare frame. I have a TIG but have never done any ally work so this was the chance to learn.....

Now that I've sorted myself out (didn't realise I had to become a member to get the "attach" option), here's a couple of pics of me and the FJ from a ride out a couple of weeks ago.

Oh. Dofus. Yoc remember. Should say 600 fazer. No gold star for you...

ponderosa was quiet and found a great new cafe too wasn't till i got on the m6 that it was busy

Two wives decided on a girlie night out. On the way home they needed a pee and nipped into a graveyard. Then they realised that they didn't have any wipes to finish up, so the first one used her knickers, and the second one found a wreath and used that. The next day one husband rang the other and said 'No more girlie nights out, mine came home with no knickers on'. The other said, 'Well if you think that's bad mine came home with a card in her crack that said 'From all of us at the fire station - we'll never forget you.''

after being blocked out for years I am back good new or bad ? thanks for sorting it Alex

Yamaha came through! They just e-mailed me the Service Manual. I am now the happy owner of mystical torque specs

I couldn't find a 'middle finger' emoji, so...

Ok if it's going to be shit weather then let's leave it till it get's better, as Tommy said Stafford show might be fun anyway for a quick trip out and if some of us meet up there we can talk about it then.

See that's why nothing gets sorted. Your to hard to please PS the emojis have gone shit on here since I was last on, I was looking for the banana man wanking but he's gone

Hi Neo all sorted now had to adjust spring length but all working good now. Cheers Graham

Hi merv,, good to see your Back,,,, be good to hear from others, se if theyre still alive,

Yeah Mike, it seemed impossible until I realised you have to take up a paid membership to get the Attach Files option. I actually didn't even realise there was such a thing as the paid membership until this - maybe it was just me not paying attention, or maybe I missed something. TBH I really don't mind this, it's much better than paying a hosting service and it costs little enough that I think it's very worthwhile. Now I find posting photo's a piece of cake - hence I've put a few up There were people from all sides of the Armed Forces there, as well as Police, Fire and Ambulance personnel. It was a really moving day. I thought this was a stunning piece of work for a jacket and just had to get a decent photo of it. It's a really visual reminder of the Falklands conflict.

And a few more photos - this time from the "Ride To The Wall" event, at the National Memorial Arboretum, back at the start of October - truly one of the most moving experiences of my life. Over 8,000 people, on 6,000 bikes, all joined together in remembrance of those who have lost their lives in the Armed Forces and Emergency Services (Police, Fire, Ambulance etc) since the end of WW2, and in support of their families, friends and comrades. I joined with a couple of mates at Leicester Forest Services on the M1 for one of the 11 group ride-in's.

And a couple when I'd given her a good clean up to show at the Rugby Bike Fest. I LOVE this bike !!

That's mine sorted for this year

Well, the fat lady sang, but she didn't make the grade. Carb kit came. New o-ring on main jet and spang into life on 2nd kick. It's been an ordeal.....for me....pushed and tested me. But at my age I've got used to how it can be. I am very grateful for the support here and rex's for the coils rewind. Life certainly throws 'em at a person. I'm drained, haha. Thanks everyone.

It just means you chat the most and on a regular basis

Thanks, Iv give the carbs another full clean today, found a bit of wear on one of the slides and the slides seem to be sticking so not sure if that’s linked. I’ll pop them back on and see if it makes any difference.

i go out after 7:30pm to avoid traffic, or before 9:30am on weekend mornings. taking it easy preserves your licence and allows you to enjoy the scenery my last ride i decided to treat the bike to some salt air. stopped at Barton on sea to enjoy the view across the Solent to the isle if Wight. the car parks had cleared out a lot by the time i got there. its always nice to avoid other people when your a miserable old git like me

if you pay peanuts...

Well they let me book the Friday off so will run up then.

No booze last night so a wee 105 mile jaunt on my 1975 Trident. Stopped in Largs for a photo and tea Edit, eventually sorted

Nice picture bud. Unfortunately I was hungover today so the only bike action was 3hrs cleaning one

I've been on earlies last two days so roads dead on the way in (0400hrs) and chok a blok on the way home. Some crazy filtering yesterday by a load of bikes and scooters, which I let myself get caught up in. When I finally got through it all I was fkn angry with myself as there were some stupid risks taken No harm done tho (other than pissing off a load of car drivers) and a much better run into work today

Same up here , mobbed ,,first warm day,,,

Totally concur jcr, but as there was three of us going out to National Trust today I had no choice but to take the car. Seen so many bikers on the roads (motorways included) was very envious. But, and a very BIG BUT. the weather was so hot I don't think I would have coped too well in my full leathers being in my seventies. Mike.

For those into engine porn. My 1975 T160 Trident was burning a bit of oil, so having missed out on a few weekend aways due to lockdown, I saved my money and gave the bike through to Grin Triumph in Kennoway, Fife. He is a one man operation with a great rep for auld Triumphs. I dropped it off in March and picked it up a couple of days ago. He stripped the top end and rebored the barrels out to +20 and fitted new pistons. He also fitted new valves, guides, springs etc and vapour blasted all components. Apologies it's not a Yam, but hey...the sharp eyed will note that the vacuum covers on the carb gantry are actually Yam parts, so qualifies

Out today, 15 degreees ,,,hottest yet,, i was on the 550.. mates on Yds7

Hi Lorraine welcome in. Is this any good? https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjszLiA6cvwAhVxThUIHVc-CecQFjAAegQICRAD&url=https%3A%2F%2Ffichasmotor.com%2Fen%2Fyamaha%2Fyamaha-fzs-600-fazer-1999%2F&usg=AOvVaw0BPcomdB6NdPs0n_02DxER Link above will take you to the page below or just type in "FZS600 1999 spec sheet" and follow your nose to something that might help. Good luck. FichasMotor Brands Search YAMAHA FZS 600 FAZER 1999 YAMAHA YAMAHA FZS 600 FAZER 1999 DESCRIPTION The motorcycle Yamaha fzs 600 fazer of 1999 was manufactured by the company Yamaha and corresponds to the series of Yamaha fzs 1000 that encompasses motorcycles of different displacements. This bike enters into the category of naked and the first model of the Yamaha fzs 1000 generation began to be sold to the general public in the year 1997, that's why we are talking about a a motorcycle generation that already has 24 years. To give you a little more information about the characteristics of this bike, it has an engine displacement of 599.00 cc (36.55 ci) and a total power of 95.00 hp (69.3 kw) at 11500 rpm with an inline four-cylinder, 4-stroke engine with electric starter. When this model marketed to the general public, had an incredible starting price of 1.170,00 €. Take a look at the information of this awesome motorcycle. TECHNICAL SPECIFICATIONS YAMAHA FZS 600 FAZER 1999 GENERAL SPECIFICATIONS Make Yamaha Model fzs 600 fazer 1999 Year 1999 Category Naked ENGINE AND TRANSMISSION Displacement 599.00 cc (36.55 ci) Engine type Inline four-cylinder, 4-stroke engine Power 95.00 hp (69.3 kw) at 11500 rpm Torque 61.00 nm (6.2 kgf-m or 45.0 ft.lbs) at 9500 rpm Engine compression 12.0:1 Bore x stroke 62.0 x 49.6 mm (2.4 x 2.0 inches) Valves per cylinder 4 valves Cooling Liquid cooled Transmission 6 gears Final drive chain DIMENSIONS AND CAPACITIES Full weight 217.0 kg (478.4 lb.) Front weight ratio 49.0 Height to seat 790 mm (31.1 inches) CONSUMPTION AND EMISSIONS Average consumption 0.64 liters/100 km (156.3 km/l or 367.53 mpg) Greenhouse gases 14.8 CO2 g/km. (CO2 - carbon dioxide emissions) 14.8 CO2 g/km (CO2 - carbon dioxide emissions) SPEED AND ACCELERATION Maximum speed 133.0 mph (214.0 km/h) Acceleration 0 to 100 km/h 3.500 seconds Acceleration 60 to 140 km/h in top gear 11.800 seconds CHASSIS, SUSPENSION AND WHEELS Front wheel travel 120 mm (4.7 inches) Rear wheel travel 120 mm (4.7 inches) Front tire 110/70-zr17 Rear tire 160/60-zr17 Front brakes Dual disc Front brake diameter 298 mm (11.7 in.) Rear brakes Monodisc Rear brake diameter 245 mm (9.6 in.) OTHER SPECIFICATIONS Starter Electric starter QUESTIONS AND DOUBTS ABOUT YAMAHA FZS 600 FAZER 1999 When was the first model of this motorcycle manufactured? 🏍 What is the fuel consumption of this motorcycle? How much power does this motorcycle have? What is the maximum speed of this motorcycle? How long does it take to accelerate to 100kmh from standstill? SPECIFICATIONS OF SIMILAR VEHICLES Ktm 990 supermoto r 2012 Honda sl 125 1973 Bultaco tss 1966 Triumph Bonneville T100 2020 Bimota sb8k santamonica 2007 Kreidler street 125 2009 Legal Notice | Privacy Notice | Cookies SpanishItalianGermanFrenchJapaneseDutchPolishPortugueseRussianChinese Copyright © 2021 FichasMotor

Some know already but , well sometimes things feel like there is a higher order. On the vmax forum there was a fellow selling a set of carbon dymag wheels, i saw the advert September last year time but had neither the money or the need at the time. Fast forward, months of covid lock up, (i keep a little slush fund to pay for my biking which has just gone up through last year). Then the drive hub shat its self and the crap that followed. Well i stumbled back across the wheel add, no comments on the post, wheels had low miles, maybe a couple of thou. With tyres and such and with them being cheap, for dymags, i sent a message on the off chance. Well f me, he still had them, he was waiting for the lockdown to end to ebay them. Sold. Bugger me if i didn't sell the old wheels the same day for 300 quid, flogging some other bits that came with the wheels (short shocks and such). Made total cost to me for a pair of carbon dymags around £600. Bloody amazing to ride on, it really is something of an experience, the lack of rotating mass and the difference it makes to the bike. Took it for a proper 100 mile blat yesterday and it was only just as i was getting home that my head was starting to figure out how to ride with them. Pegs dragging the roundabouts heading back to the village, plenty of tyre left so frame bolts are next . Look killer too.

Was expecting Monty Python.

Doesent have valve seats, what it does, or rather did! was have crank seals, they are long dead. I would bet just about every seal on that motor is split or has shrunk to the point of failure. Would be a VERY smart move to fit new crank bearings at the same time as having sat that long they may well be toast so while your there for an extra tenner. Check the other significant bearings too. They can sometimes rust if they have been left without a covering of oil. Depends on where you are but as you haven't given us ANY real information to work with I'm guessing. You can get full seal and gaskets from fowlers. Bike has been in production as far as the engine goes for donkeys years, parts are readily available. Cycle parts not so much.

A new, instant covid test

Well, as I say, I'm no mechanic, but that's how I'd go about finding the problem. Good luck!

It has been a while since I popped in here and in the search for more power and some research I have fitted the tope end from a TZR250 2XT model. The 2XT has plated bores instead of steel liners so are lighter and they have auxiliary exhaust ports and wider power valves fr more power so over the last week I have been busy prepping the 2XT top end ready to fit on my engine, which I completed yesterday. I have been out on it today in the one dry spell we had and gave it a good runabout an checking the plugs which looked happy and the bike felt happy too, went into the fun zone a few times and what a difference the 2xt top end has made. It has gone from a mad hooligan bike into a bonkers hooligan in the fun zone. It will be off to the dyno very soon for final set up and the all important back wheel power output readings.

Snakebite68 and neversaydie, thanks again for your help and suggestions. I have an update if you're interested! Ref the stubborn castle nut, I finally managed to get it free using a vice and adjustable spanner (covered the nut with a rag first to minimise damage to the nut). I decided not to get the header and silencer re-chromed for now and used Simoniz VHT silver to re-spray the corroded sections. It is matt finish but you can't really see it because it's on the inside. When I removed the Kenzo exhaust the bike came with, there was no gasket so I fitted a new one and mounted the renovated exhaust. The difference to the bike's power is really noticeable, it pulls really well up to an indicated 65mph and when I get down towards the tank it reaches just over 70. Had some great fun ragging it around this weekend and the more I've thrashed it the freer the engine has become - I think it was crying out for a good blast. It's just a great fun bike to ride and so light compared with my other big bikes. Feels like being 17 and 1989 all over again -only this time I don't have learner plates flying around. I've attached a pic of the bike with the exhaust fitted. Cheers, James

How's it going every one? I've not ridden bar a couple of hire mopeds on holiday since I brought my tiger to squires and we went on ride out to Scarborough. That's got to be atleast 5 years. Sold on and left without a bike was a big difference in life cause I used to ride me, far and wide in all weather's and all hours. Met some great people attended some great days out. How I never got any points or anything I'll never know cause I rode that TDR singing all the way. It's still around. I kept it for a long time but unfortunately I couldn't keep it anymore and it's not with a lad I know in boxes. I've managed to track down my Tiger last month and delt for it back unfortunately it's in a bad way having done one European then parked in a leaking garage with a full tank since 2017. Wouldn't be a problem but these steamer tigers have plastic tanks. It's well oxidized as well. It's all doable. I've been homeless for a while well living in a car for a year. Thing's have changed and I've now found affordable housing so that's good. I had me hgv licence revoked and my car for a bit but that's back now and I'm due my hgv back anytime soon. Tip here is never tell a doctor anything. That help you asking for could cost you everything. You can't drive a wagon if you low so they take it off you and you've just got to deal with it and some how stay afloat. Well I hope you all still around and doing well. I've just the two bikes now. Neither currently on the road. My old Triumph Tiger and a Triumph Sprint I bought on the way home from picking up the tiger. Not many people seem to want them, shame cause these 900 (885cc) triples are great bikes with a lovely bark Davy

ignore Jimm's reply when he chimes in

Did an evening track session at Donington Wednesday 9th, nice and ry, first since last Sept. Rusty riding at first, disturbed the gravel a little, but smoother in the later sessions.

All you need is fresh petrol. Pour it over the fkr, drop a match, walk away and do not look back 40yrs and the hurt is still there

Says the file is unavailable You'd think a moderator would be able to upload them properly

Just booked myself onto a track day at blyton Park on the 9th so making a long weekend of it I think

Is this the hole it left,,

Thanks! Small update - the new carb is delayed so I spent today stripping the old one, cleaning and rebuilding and double checking the vacuum system is sealed and she's now started again! I still need the new carb as the siezed screws ain't budging, and one cylinder is a bit tempermental. I need to sort the neutral switch too

You can get keyless systems and isolators for anything 12v, then if you press a button on a keyfob its dead. Wont save you getting robbed and the bike could still get scratched up as they bail but you would not lose it. Had one on a suzuki i owned, ig switch did nothing it was just a dummy. Am looking at the same for my vmax, this one has a transponder you can fit into your gloves and then you put the receiver wherever you choose. Without the transponder being put in the right place nothing doin. This kind of thing, Bikermart: MotoGadget m~Lock Contactless Radio Frequency Keyless Ignition Lock, KEYLESS IGNITION No radio transmitter as such so the villains cannot code grab. I'm only looking at it because the ig is in an utterly stuuuupid place on my vmax. But it could work for you.

Well it seems that I am really thinking of changing the FJR, been looking at the new Trumpet speed tripleRS, it's not officially available till April I think but it does look nice! Just asking really but are they any better than the horrible things I used to ride back in the day? My Bonnerville was great in a straight line but just god awful in bends plus the loss of oil was always a bit of a concern on long rides. I have heard as well that some of the latest trumpets have gearbox problems and that would be a bit of a bummer. I really need something a LOT lighter than the FJR as I have some problems with the sheer weight of the Yam as it weighs in at a massive 300 plus kilos and I'm not getting any younger and heaving it around the garage is getting a bit difficult. Also this year has seen a few changes not least of which is I have to have an ICD fitted into my chest cos chemo therapy has side effects (who knew!) should be ok to ride still but don't want to be heaving the Yam around any more. Or if you have any suggestions of bikes I should be looking at? I want something in the liter+ range really and naked is ok but would like a small screen just to keep the flies out of my teeth. Hope your all keeping well and this awful disease has left you alone and that your families have not been affected, I have lost one friend to it.